MI A3 Dead Solution 100% Fix ✅️ #shorts #viralvideo #trending
Mi3 Model has arrived that is in a dead condition and the charging current is 0.10 stack, so this model has a common problem that the CPU gets dry soldered which leads to dry solders due to black pasting on the CPU. So here we will cut the shield and safely cut the glue from all the sides and remove the CPU safely along with 360 temperature and air, and after removing the CPU, we have to clean the board without damaging any printer and scratches on the board, and we will remove the black glue of the CPU and clean it by rebolling in a new way using flux, and using flux, we will install the CPU here on the board and after installation, fit the phone and check if our problem has been solved here, and the end logo has also arrived and our phone has been successfully repaired with data. Thanks for watching.
# Troubleshooting Common Problems in Mi3 Model
In this article, we will discuss the common problem faced in the Mi3 model which is related to the dead condition of the phone and the low charging current. We will guide you on how to troubleshoot and fix these issues using simple techniques.
## Understanding the Root Cause
The main reason behind the dead condition of the Mi3 model is the dry soldering of the CPU due to black pasting. This leads to dry solders and prevents the phone from functioning properly. It is important to address this issue to revive the phone.
## Steps to Troubleshoot
1. Cut the shield and safely remove the glue from all sides of the CPU.
2. Remove the CPU safely with the temperature set to 360 and using air.
3. Clean the board without causing any damage to printers or scratches on the board.
4. Remove the black glue from the CPU and clean it by rebolling using flux.
5. Install the CPU on the board carefully using flux.
6. Fit the phone after installation and check if the issue is resolved.
## Conclusion
By following the above steps, you can troubleshoot and fix the common problems faced in the Mi3 model. It is important to address the root cause of the issue to revive the phone and ensure its proper functioning. Thank you for reading and watching the tutorial.
#Dead #Solution #Fix #shorts #viralvideo