Infinix Zero 30 X6731B FRP Bypass With DFT Pro | infinix x6731b frp bypass | infinix zero 30 frp

Bypassing FRP Lock on Infinix 030 X 6831B: A Step-by-Step Guide

The Factory Reset Protection (FRP) lock is a security feature designed to prevent unauthorized access to your device after a factory reset. If you’ve encountered an FRP lock on your Infinix 030 X 6831B, fear not! In this guide, we will walk you through the process of bypassing this lock efficiently.

What You’ll Need

Before we start, make sure you have the following items ready:

• Infinix 030 X 6831B mobile phone
• USB cable for connectivity
• DFT Pro tool installed on your computer
• A reliable computer or laptop

Step 1: Power Off Your Device

The first step in bypassing the FRP lock is to completely power off your Infinix device. To do this:

1. Press and hold the power button.
2. Select Power Off from the options.
3. Wait for your device to shut down completely.

Step 2: Open the DFT Pro Tool

Once the device is off, it’s time to move to the computer. Follow these steps:

1. Launch the DFT Pro tool on your computer.
2. Navigate to the Add Tool section.
3. Locate and select Redmi from the options available.
4. Go to Techno Finish.

Step 3: Access Meta Mode

Now we need to put the device in Meta Mode to proceed with the bypassing process:

1. In the DFT Pro tool, find the Meta Mode option and click on it.
2. Look for Reset FRP Infinix Techno i10 and click to select it.

Step 4: Start the Bypass Process

With the necessary options selected, it’s time to start the actual bypass process:

1. Click on the Start button in the DFT Pro tool.
2. Now, take your powered-off Infinix device and connect it to the computer using the USB cable.
3. Do not press any buttons on the mobile during this step; just plug in the cable.

Step 5: Wait for the Device to Power On

After connecting your device:

1. Wait patiently for your phone to turn on. It may take a little longer than usual due to the actions initiated by the DFT Pro tool.
2. The tool will recognize your device and begin to process it.

Step 6: Confirmation of Bypass

Once the device has powered on:

1. You will see a confirmation that the FRP has been successfully removed.
2. Your device should now be fully operational without any FRP locks.

Step 7: Factory Reset (If Necessary)

Sometimes, even after a successful bypass, the device may experience issues like hanging or freezing. To resolve this:

1. Navigate to Settings on your device.
2. Look for the Factory Reset option.
3. Follow the steps to perform a factory reset on your device.

This reset ensures that the device is functioning smoothly without any FRP-related issues after the bypass.

Conclusion

In conclusion, bypassing the FRP lock on your Infinix 030 X 6831B can be achieved quite easily with the right tools and steps. It is crucial to follow the process meticulously to ensure a successful bypass. Always remember to perform a factory reset afterward if you encounter any problems. This ensures that your device is running optimally and free from any permanent lock.

Now that you have this guide, you can confidently bypass the FRP lock whenever needed. Happy troubleshooting!

#Infinix #X6731B #FRP #Bypass #DFT #Pro