Samsung Galaxy A14 A145F FRP Bypass One Click With Chimera Tool | samsung a145f frp bypass 2025
Samsung Galaxy A14 FRP Bypass Guide
If you’ve recently acquired a Samsung Galaxy A14 and it has a Google account locked due to FRP (Factory Reset Protection), don’t worry. This guide will help you bypass the FRP using a few simple tools. We will be focusing on the Chamra Tool, which is a very effective method for this procedure.
Understanding FRP
FRP, or Factory Reset Protection, is a security measure introduced by Google to protect user data in case of theft or loss of the device. When you factory reset your device, it prompts for the last Google account information used on the phone. If you don’t remember this information, accessing your device can become challenging.
Tools Required
Before we start the bypass process, ensure you have the following:
- Chamra Tool: A software tool used for flashing and unlocking mobile devices.
- USB Cable: A data cable to connect your device to the computer.
- PC or Laptop: To run the Chamra Tool.
- Screwdriver: In case you need to open the device for battery disconnection.
Steps to Bypass FRP
Step 1: Power Off the Device
Before starting the FRP bypass process, turn off your Samsung Galaxy A14. This is crucial for what comes next.
- Press and hold the Power button.
- Select "Power Off."
- Wait for the device to completely shut down.
Step 2: Disconnect the Battery
To ensure safety and prepare the device for the next steps:
- Open the back cover of your device.
- Disconnect the battery.
- Use your screwdriver carefully to avoid damaging the device.
Step 3: Reconnect the Battery
Once the battery is disconnected:
- Reconnect the battery.
- Make sure it is secured properly.
Step 4: Identify and Connect the Test Points
The Chamra Tool requires you to short specific test points to proceed:
- Identify the two test points on the motherboard.
- Using a jumper, short these points.
- Connect the USB cable to your device.
- Make sure to keep the points shorted during this step.
Step 5: Press the Power Button
Now, you need to establish a connection between your phone and the PC:
- Press the Power button repeatedly while the USB is connected.
- This is crucial; otherwise, your device won’t connect properly to the PC.
- Continue pressing until you see confirmation that the device has connected.
Step 6: Launch the Chamra Tool
Once your phone is connected, launch the Chamra Tool on your PC:
- Open the Chamra Tool software.
- Look for the option labelled "Arrange FRP."
- Click on "Remove FRP."
- Select "Start."
Step 7: Complete the Bypass Process
After clicking "Start," the tool will begin the FRP removal process:
- Wait for the process to complete.
- Once it says "FRP Removed," you can disconnect the USB cable.
Step 8: Power On the Device
After the FRP removal is complete:
- Disconnect the battery again.
- Reconnect the battery.
- Power on your Galaxy A14.
Step 9: Finalize Settings
When your device turns on, it might take a few moments to finalize settings:
- It might reboot automatically.
- Wait for the phone to boot up completely.
Step 10: Confirm FRP Bypass
Once your phone is on:
- You should no longer see the Google account prompt.
- You can now set up your device as new.
Conclusion
Congratulations! You’ve successfully bypassed the FRP lock on your Samsung Galaxy A14 using the Chamra Tool.
If you found this guide helpful, please like the video and subscribe to our channel for more tutorials. If you encounter any issues, feel free to reach out via WhatsApp or leave a comment below. Online assistance is also available; simply send your IMEI number or serial number for help with your device.
By following these steps, you can now make the most out of your smartphone without the hassle of being locked out by Google accounts. Enjoy your newly unlocked Samsung Galaxy A14!
#Samsung #Galaxy #A14 #A145F #FRP #Bypass #Click